| Base Power (1st gear) – Net |
145.0 hp |
| Engine Model |
Cat® C7.1 ACERT™ |
| Bore |
4.13 in |
| Stroke |
5.31 in |
| Speed @ Rated Power |
2,100 rpm |
| Base Power (all gears) Net |
145.0 hp |
| VHP Plus – gear 8F, Net |
189.0 hp |
| VHP Plus – gear 6F, Net |
179.0 hp |
| High Ambient - Fan Speed - Standard |
1,000 rpm |
| AWD Range – Net (Metric) |
114-156 kW (155-212 hp) |
| VHP Plus – gear 3F, Net |
161.0 hp |
| VHP Plus Range - Net |
108-141 kW (145-189 hp) |
| VHP Plus – gear 1F, Net |
145.0 hp |
| Maximum Torque Net |
693.0 lb ft |
| Emissions |
Tier 4 Interim/Stage IIIB equivalent |
| Base Power (1st gear) – Net (Metric) |
147.0 hp |
| VHP Plus – gear 5F, Net |
174.0 hp |
| VHP Plus – gear 2F, Net |
153.0 hp |
| Torque Rise |
45% |
| Standard Capability |
109.0 °F |
| VHP Plus – gear 4F, Net |
169.0 hp |
| AWD Range – Net |
114-156 kW (153-209 hp) |
| VHP Plus – gear 7F, Net |
184.0 hp |
| VHP Plus Range - Net - Metric |
108-141 kW (147-192 hp) |
| Displacement |
428.0 in3 |
| Number of Cylinders |
6 |
| Derating altitude |
10000.0 ft |
| High Ambient - Fan Speed - Maximum |
1,350 rpm |
| High Ambient - Fan Speed - Minimum |
500 rpm |
| High Ambient Capability |
122.0 ° F |
| Forward/Reverse Gears |
8 Forward/6 Reverse |
| Transmission |
Direct Drive, Powershift |
| Brakes – Service |
Multiple Oil Disc |
| Brakes – Service, surface area |
3565.0 in2 |
| Brakes – Parking |
Multiple Oil Disc |
| Brakes – Secondary |
Dual Circuit |
| Circuit Type |
Parallel |
| Pump Type |
Variable Piston |
| Pump Output |
55.7 gal/min |
| Maximum System Pressure |
3500.0 psi |
| Reservoir Tank Capacity |
15.85 gal |
| Reservoir Tank Capacity |
609.0 gal |
| Top Speed – Forward |
28.4 mph |
| Top Speed – Reverse |
22.4 mph |
| Turning Radius, Outside Front Tires |
24.3 ft |
| Steering Range – Left/Right |
47.5° |
| Articulation Angle – Left/Right |
20° |
| Forward – 1st |
2.5 mph |
| Forward – 2nd |
3.4 mph |
| Forward – 3rd |
4.9 mph |
| Forward – 4th |
6.7 mph |
| Forward – 5th |
10.4 mph |
| Forward – 6th |
14.2 mph |
| Forward – 7th |
19.5 mph |
| Forward – 8th |
28.4 mph |
| Reverse – 1st |
1.9 mph |
| Reverse – 2nd |
3.9 mph |
| Reverse – 3rd |
5.3 mph |
| Reverse – 4th |
8.2 mph |
| Reverse – 5th |
15.4 mph |
| Reverse – 6th |
22.4 mph |
| Fuel Capacity |
100.0 gal |
| Cooling System |
12.9 gal |
| Hydraulic System – Tank |
16.9 gal |
| Engine Oil |
7.9 gal |
| Trans./Diff./Final Drives |
16.5 gal |
| Tandem Housing (each) |
15.6 gal |
| Front Wheel Spindle Bearing Housing |
0.13 gal |
| Circle Drive Housing |
1.8 gal |
| Drawbar – Width |
3.0 in |
| Circle – Diameter |
60.2 in |
| Circle – Blade Beam Thickness |
1.4 in |
| Drawbar – Height |
6.0 in |
| Front Frame Structure – Width |
8.0 in |
| Front Frame Structure – Height |
11.0 in |
| Drawbar - thickness |
0.4 in |
| Front-top/bottom plate – width |
10.0 in |
| Front-top/bottom plate – thickness |
0.87 in |
| Front Axle – Height to Center |
22.5 in |
| Front axle – height to center |
in |
| Front Axle – Total Oscillation per Side |
32° |
| Height |
19.8 in |
| Width |
6.8 in |
| Sidewall Thickness – Inner |
0.5 in |
| Sidewall Thickness – Outer |
0.6 in |
| Drive Chain Pitch |
1.8 in |
| Wheel Axle Spacing |
59.5 in |
| Tandem Oscillation – Front Up |
15° |
| Tandem Oscillation – Front Down |
25° |
| Blade Width |
12.0 ft |
| Moldboard – height |
24.0 in |
| Moldboard – thickness |
0.87 in |
| Arc Radius |
16.3 in |
| Throat Clearance |
4.9 in |
| Cutting Edge – Width |
6.0 in |
| Cutting Edge – Thickness |
0.6 in |
| End Bit – Width |
6.0 in |
| End Bit – Thickness |
0.6 in |
| Blade Pull – base GVW |
23737.0 lb |
| Blade Pull – maximum GVW |
44088.0 lb |
| Blade Down Pressure - Base GVW |
15030.0 lb |
| Blade Down Pressure - Maximum GVW |
27235.0 lb |
| Circle Centershift – Right |
25.8 in |
| Circle Centershift – Left |
25.8 in |
| Moldboard Sideshift – Right |
26.0 in |
| Moldboard Sideshift – Left |
20.1 in |
| Maximum Blade Position Angle |
90° |
| Blade Tip Range – Forward |
40° |
| Blade Tip Range – Backward |
5° |
| Maximum Lift above Ground |
16.8 in |
| Maximum Depth of Cut |
28.3 in |
| Maximum Shoulder Reach Outside of Tires – Left |
68.6 in |
| Maximum Shoulder Reach Outside of Tires – Right |
75.0 in |
| Ripper shank holder spacing |
21.0 in |
| Ripping Depth – Maximum |
8.9 in |
| Ripper Shank Holders |
5 |
| Penetration Force |
17692.0 lb |
| Pryout Force |
5660.0 lb |
| Machine Length Increase, Beam Raised |
41.5 in |
| Front, V-Type: Working Width |
47.4 in |
| Front, V-Type, 5 or 11 Tooth – Scarifying Depth, Maximum |
18.4 in |
| Mid, Straight – Working Width |
71.0 in |
| Mid, V-Type: Working width |
46.6 in |
| Front, V-Type, 5 or 11 Tooth – Working Width |
40.6 in |
| Mid, V-Type – Scarifier Shank Holders |
11 |
| Mid, Straight – Scarifier Shank Holders |
17 |
| Mid, Straight – Scarifier Shank Holder Spacing |
4.4 in |
| Mid, V-Type: Scarifying depth, maximum |
11.5 in |
| Front, V-Type, 5 or 11 Tooth – Scarifier Shank Holders |
5/11 |
| Mid, Straight – Ripping Depth, Maximum |
12.5 in |
| Front, V-Type, 5 or 11 Tooth – Scarifier Shank Holder Spacing |
4.6 in |
| Mid, Straight – Scarifying Depth, Maximum |
16.8 in |
| Mid, V-Type: Scarifier shank holder spacing |
4.6 in |
| Operating Weight – Typically Equipped |
41859.0 lb |
| Gross Vehicle Weight - Maximum - Rear Axle |
33312.0 lb |
| Gross Vehicle Weight: Maximum – total |
9777.0 lb |
| Gross Vehicle Weight: Typically Equipped – front axle |
27438.0 lb |
| Gross Vehicle Weight - Maximum - Total |
48987.0 lb |
| Gross Vehicle Weight - Maximum - Front Axle |
15675.0 lb |
| Gross Vehicle Weight – Typically Equipped – Front Axle |
11614.0 lb |
| Gross Vehicle Weight – Typically Equipped – Rear Axle |
30244.0 lb |
| Gross Vehicle Weight: Base – total |
37214.0 lb |
| Operating Wt, typically equipped - total |
41859.0 lb |
| Sound |
ISO 6394; ISO 6395 |
| Steering |
ISO 5010 |
| ROPS/FOPS |
ISO 3471/ISO 3449 |
| Brakes |
ISO 3450 |
| 17.5 R25 Tire (14x25 Rim) Dimension Adjustments - Width to Tire Front/Rear Tires Dimensions 12, 13 |
7.6 in |
| 17.5 R25 Tire (14x25 Rim) Dimension Adjustments - Height to Dimensions 1, 2, 8, 9, 10 |
-0.8 in |
| 17.5 R25 Tire (14x25 Rim) Dimension Adjustments - Width to Tire Centerline Dimension 11 |
4.1 in |
| 17.5 R25 Tire (14x25 Rim) Dimension Adjustments - Length Front Tire to Rear of Machine Dimension 6 |
-0.6 in |
| Air Conditioning |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.88 metric tonnes. |
| Note |
Dimension changes may vary by brand/type and inflation of tires. |
| Note |
U.S. EPA Tier 4 Interim/EU Stage IIIB equivalent |