| Base Power (all gears) – Net |
259.0 hp |
| Gross Vehicle Weight – Base – Total |
46796.0 lb |
| Blade Width |
14.0 ft |
| VHP - gears 4-8 Net |
273.57 hp |
| Gross Vehicle Weight – Maximum – Total |
65998.0 lb |
| Gross Vehicle Weight – Maximum – Front Axle |
9969.0 lb |
| Gross Vehicle Weight – Maximum – Rear Axle |
44021.0 lb |
| Gross Vehicle Weight – Base – Front Axle |
12541.0 lb |
| Gross Vehicle Weight – Base – Rear Axle |
34255.0 lb |
| Engine Model |
Cat® C11 ACERT™ VHP |
| Displacement |
677.0 in3 |
| Bore |
5.1 in |
| Stroke |
5.5 in |
| Top Speed – Forward |
31.0 mph |
| Top Speed – Reverse |
24.5 mph |
| Turning Radius, Outside Front Tires |
25.9 ft |
| Steering Range – Left/Right |
47.5° |
| Articulation Angle – Left/Right |
20° |
| Fuel Capacity |
130.0 gal |
| Speed @ Rated Power |
1800 RPM |
| Forward/Reverse Gears |
8 Fwd / 6 Rev |
| Transmission |
Direct drive, power shift, Countershaft |
| Brakes – Service |
oil-actuated, oil-disc |
| Brakes – Service, Surface Area |
5347.0 in2 |
| Circuit Type |
Electro-hydraulic load sensing, closed center |
| Pump Type |
Variable displacement |
| Pump Output |
74.0 gal/min |
| Maximum System Pressure |
3500.0 psi |
| Drawbar – Width |
3.0 in |
| Standby Pressure |
450.0 psi |
| Forward – 1st |
2.7 mph |
| Forward – 2nd |
3.7 mph |
| Forward – 3rd |
5.3 mph |
| Forward – 4th |
7.3 mph |
| Forward – 5th |
11.4 mph |
| Forward – 6th |
15.4 mph |
| Forward – 7th |
21.3 mph |
| Forward – 8th |
31.0 mph |
| Reverse – 1st |
2.1 mph |
| Reverse – 2nd |
4.0 mph |
| Reverse – 3rd |
5.8 mph |
| Reverse – 4th |
9.0 mph |
| Reverse – 5th |
16.9 mph |
| Reverse – 6th |
24.5 mph |
| Brakes – Parking |
Spring applied, hydraulically released |
| Brakes – Secondary |
Oil-actuated, oil-disc |
| Circle – Diameter |
71.75 in |
| Circle – Blade Beam Thickness |
2.0 in |
| Drawbar – Height |
8.0 in |
| Moldboard – Height |
27.0 in |
| Moldboard – Thickness |
1.0 in |
| Arc Radius |
16.3 in |
| Throat Clearance |
4.6 in |
| Cutting Edge – Width |
8.0 in |
| Cutting Edge – Thickness |
0.6 in |
| End Bit – Width |
6.0 in |
| End Bit – Thickness |
0.6 in |
| Blade Pull – Base GVW |
30829.0 lb |
| Blade Pull – Maximum GVW |
39619.0 lb |
| Circle Centershift – Right |
20.5 in |
| Blade Down Pressure – Base GVW |
22130.0 lb |
| Circle Centershift – Left |
25.5 in |
| Blade Down Pressure – Maximum GVW |
38781.0 lb |
| Moldboard Sideshift – Right |
31.1 in |
| Moldboard Sideshift – Left |
29.1 in |
| Maximum Blade Position Angle |
65° |
| Blade Tip Range – Forward |
40° |
| Blade Tip Range – Backward |
5° |
| Maximum Shoulder Reach Outside of Tires – Right |
89.7 in |
| Maximum Shoulder Reach Outside of Tires – Left |
85.4 in |
| Maximum Lift above Ground |
16.5 in |
| Maximum Depth of Cut |
17.3 in |
| Cooling System |
12.3 gal |
| Hydraulic System – Tank |
15.9 gal |
| Ripping Depth – Maximum |
15.8 in |
| Ripper Shank Holders |
7 |
| Shank Holder Spacing – Minimum |
15.0 in |
| Shank Holder Spacing – Maximum |
19.0 in |
| Penetration Force |
27222.0 lb |
| Pryout Force |
28146.0 lb |
| Machine Length Increase, Beam Raised |
45.5 in |
| Front Axle – Height to Center |
25.2 in |
| Front Axle – Wheel Lean, Left/Right |
17.1° |
| Front Axle – Total Oscillation per Side |
32.0° |
| Number of Cylinders |
6 |
| Derating Altitude |
13000.0 ft |
| Standard – Fan Speed – Maximum |
1450 RPM |
| Standard – Fan Speed – Minimum |
550 RPM |
| Standard – Ambient Capability |
109.0 ° F |
| High Ambient – Fan Speed – Maximum |
1650 RPM |
| High Ambient – Fan Speed – Minimum |
550 RPM |
| High Ambient Capability |
122.0 ° F |
| Height |
24.25 in |
| Width |
8.4 in |
| Sidewall Thickness – Inner |
0.8 in |
| Sidewall Thickness – Outer |
0.8 in |
| Drive Chain Pitch |
2.24 in |
| Wheel Axle Spacing |
65.0 in |
| Tandem Oscillation – Front Up |
15° |
| Tandem Oscillation – Front Down |
25° |
| Height – Top of Cab |
139.2 in |
| Length – Counterweight to Ripper |
429.0 in |
| Width – Outside Front Tires |
109.9 in |
| Length – Front Axle to Mid Tandem |
258.0 in |
| Length – Front Tire to Rear of Machine |
370.6 in |
| Length – Front Axle to Moldboard |
112.0 in |
| Length – Between Tandem Axles |
65.0 in |
| Width – Outside Rear Tires |
109.9 in |
| Width – Tire Center Lines |
93.0 in |
| Height – Front Axle Center |
25.2 in |
| Height to Exhaust Stack |
128.2 in |
| Height to Top of Cylinders |
112.4 in |
| Ground Clearance at Rear Axle |
15.1 in |
| Engine Oil |
7.9 gal |
| Transmission/Differential/Final Drives |
23.5 gal |
| Tandem Housing (each) |
25.5 gal |
| Front Wheel Spindle Bearing Housing |
0.24 gal |
| Circle Drive Housing |
1.6 gal |
| Maximum Torque |
1049.0 lb ft |
| Front Frame Structure – Width |
12.0 in |
| Front Frame Structure – Height |
16.0 in |
| Front Frame Structure – Thickness |
0.6 in |
| Base Power (1st gear) – Net |
259.0 hp |
| Torque Rise |
26% |
| Brakes |
ISO 3450 |
| Sound |
ISO 6394 / ISO 6395 |
| VHP Range – Net |
193-204 kW (259-274 hp) |
| ROPS/FOPS |
ISO 3471 / ISO 3499 |
| Steering |
ISO 5010:1992 |
| VHP Plus Range – Net |
193-219 kW (259-294 hp) |
| Operating Weight – Typically Equipped |
53738.0 lb |