HOLT CAT Rentals

24/7 Rental Hotline: 800 RENT CAT (800 736 8228)
< Back<< Back To Main
Caterpillar - 226D Skid Steer Loader

The Cat® 226D Skid Steer Loader, with its radial lift design, delivers impressive mid-lift reach and excellent digging performance with outstanding drawbar power.

Rent this Equipment
Brochure / Documentation - C10504937 Brochure / Documentation - C10129004 Brochure / Documentation - CM20150515-50984-04951 Brochure / Documentation - CM20140227-50502-65044
Engine Model Cat C2.2 CRDI
Net Flywheel Power 65.8 hp
Gross Power 153.0 hp
Gross Power SAE J1995 65.8 hp
Net Power EEC ISO 9249 66.5 hp
Net Power SAE 1349 65.8 hp
Displacement 134.3 in3
Stroke 3.9 in
Bore 3.3 in
Rated Operating Capacity 1550.0 lb
Rated Operating Capacity w/Optional Counterweight 1650.0 lb
Tipping Load 3100.0 lb
Breakout Force, Tilt Cylinder 3983.0 lb
Operating Weight 5705.0 lb
Wheelbase 41.5 in
Length w/Bucket on Ground 99.4 in
Length w/o Bucket 127.3 in
Height to Top of Cab 79.8 in
Vehicle Width over Tires 143.8 in
Max Overall Height 110.9 in
Bucket Pin Height at Max Lift 8.5 in
Bucket Pin Height at Carry Pos. 21.0 in
Reach at Max Lift and Dump 81.8 in
Clearance at Max Lift and Dump 6.9 in
Ground Clearance in
Departure Angle
Bumper Overhang - Rear Axle in
Maximum Dump Angle
Turn Radius from Ctr - Rear 59.6 in
Turn Radius from Ctr - Coupler 43.5 in
Turn Radius from Ctr - Bucket 77.8 in
Max. Reach w/Arms-Parallel 50.7 in
Rack Back Angle at Max Height 88.9°
Loader Hydraulic Pressure 3336.0 psi
Loader Hydraulic Flow 18.0 gal/min
Hydraulic Power (calculated) 35.5 hp
Loader Hydraulic Pressure 3336.0 psi
Loader Hydraulic Flow 26.0 gal/min
Hydraulic Power (calculated) 50.9 hp
ROPS ISO 3471:2008
FOPS ISO 3449:2005 Level I
FOPS Level II ISO 3449:2005 Level II
Travel Speed Forward 7.6 mph
Travel Speed Forward - 2-Speed Option 11.1 mph
Chain box, each side 1.8 gal
Cooling System 3.2 gal
Engine Crankcase 2.6 gal
Fuel Tank 15.1 gal
Hydraulic System 11.9 gal
Hydraulic Tank 9.0 gal
Inside Cab* 83.0 dB(A)
Outside Cab** 102.0 dB(A)
Engine Model
Net Flywheel Power 65.8 hp
Gross Power – SAE J1995 67.1 hp
Displacement 134.3 in3
Stroke 3.9 in
Bore 3.3 in
Peak Torque - 1,500 rpm - SAE J1995 153.0 ft·lbf
Net Power – ISO 9249 66.5 hp
Operating Weight 5705.0 lb
Rated Operating Capacity 1550.0 lb
Tipping Load 3100.0 lb
Breakout Force - Tilt Cylinder 3983.0 lb
Rated Operating Capacity with Optional Counterweight 1650.0 lb
Wheelbase 41.5 ft
Height - Top of Cab 79.8 in
Vehicle Width over Tires 58.9 in
Ground Clearance 6.9 in
Departure Angle
Maximum Dump Angle
Rack Back Angle - Maximum Height
Clearance at Maximum Lift and Dump 81.8 in
Bucket Pin Height at Max Lift 110.9 in
Bucket Pin Height - Carry Position 8.5 in
Maximum Overall Height 143.8 in
Length - With Bucket on Ground 127.3 in
Length - Without Bucket 99.4 in
Maximum Reach - With Arms Parallel to Ground 50.7 in
Turning Radius from Center - Machine Rear 59.6 in
Turning Radius from Center - Coupler 43.5 in
Turning Radius from Center - Bucket 77.8 in
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow 26.0 gal/min
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure 3336.0 psi
Hydraulic Flow - High Flow - Hydraulic Power (Calculated) 50.9 HP
Hydraulic Flow - Standard - Loader Hydraulic Flow 18.0 gal/min
Hydraulic Flow - Standard - Loader Hydraulic Pressure 3336.0 psi
Hydraulic Flow - Standard - Hydraulic Power (Calculated) 35.5 HP
ROPS
FOPS
FOPS Level II
Travel Speed - Forward or Reverse - Two Speed Option 11.1 mile/h
Travel Speed - Forward or Reverse - One Speed 7.6 mile/h
Cooling System 3.2 gal
Engine Crankcase 2.6 gal
Fuel Tank 15.1 gal
Hydraulic System 11.9 gal
Hydraulic Tank 9.0 gal
Chain Box - Each Side 1.8 gal (US)
Note
Air Conditioning
Note
Note (1)
Note (2)
Note (3)
Note