| Engine Model |
Cat C2.2 |
| Net Power |
58.9 hp |
| Gross Power – SAE J1995 |
60.2 hp |
| Gross Power SAE J1995 |
58.9 hp |
| Displacement |
134.3 in3 |
| Bore |
3.3 in |
| Stroke |
3.9 in |
| Net Power – ISO 9249 |
59.6 hp |
| Operating Weight |
7685.0 lb |
| Rated Operating Capacities: 50% Tipping Load |
2300.0 lb |
| Rated Operating Capacities - 35% Tipping Load |
1610.0 lb |
| Ground Contact Area - With 320 mm/12.6 in Track |
1373.0 lb |
| Tipping Load |
4600.0 lb |
| Breakout Force - Tilt Cylinder |
3963.0 lb |
| Ground Pressure - With 320 mm/12.6 in Track |
5.6 psi |
| Clearance at Maximum Lift and Dump |
88.7 ft |
| Length of Track on Ground |
54.5 in |
| Max Overall Height |
118.2 in |
| Clearance at Max Lift and Dump |
7.6 in |
| Length - With Bucket on Ground |
127.3 in |
| Bucket Pin Height - Carry Position |
8.6 in |
| Turning Radius from Center - Coupler |
45.7 in |
| Maximum Dump Angle |
48° |
| Reach - Maximum Lift/Dump |
28.6 in |
| Vehicle Width (400 mm/15.7 in tracks) |
69.1 in |
| Length - Without Bucket |
99.3 in |
| Turning Radius from Center - Bucket |
81.1 in |
| Overall Length - Track |
71.2 in |
| Height - Top of Cab |
80.3 ft |
| Maximum Reach - With Arms Parallel to Ground |
51.8 in |
| Vehicle Width (320 mm/12.6 in tracks) |
66.0 in |
| Departure Angle |
34.5° |
| Turning Radius from Center - Machine Rear |
57.4 in |
| Maximum Overall Height |
150.8 in |
| Rack Back Angle - Maximum Height |
87.5° |
| Hydraulic Flow - High Flow - Loader Hydraulic Pressure |
3336.0 psi |
| Hydraulic Flow - Standard - Loader Hydraulic Pressure |
3336.0 psi |
| Hydraulic Flow - High Flow - Loader Hydraulic Flow |
26.0 gal/min |
| Hydraulic Flow - Standard - Loader Hydraulic Flow |
18.0 gal/min |
| Hydraulic Flow - High Flow - Hydraulic Power (Calculated) |
50.9 HP |
| Hydraulic Flow - Standard - Hydraulic Power (Calculated) |
35.5 HP |
| ROPS |
ISO 3471:2008 |
| FOPS |
ISO 3449:2005 Level I |
| FOPS Level II |
ISO 3449:2005 Level II |
| Travel Speed - Forward or Reverse |
7.0 mile/h |
| Cooling System |
3.2 gal |
| Engine Crankcase |
2.6 gal |
| Fuel Tank |
15.1 gal |
| Hydraulic System |
11.9 gal |
| Hydraulic Tank |
9.0 gal |
| Note |
*Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, 1676 mm (66 in) dirt bucket, 320 mm (12.6 in) tracks, standard flow hydraulics, C0 cab (OROPS, static seat), 880 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted). |
| Note |
*Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, 1676 mm (66 in) dirt bucket, 320 mm (12.6 in) tracks, standard flow hydraulics, C0 cab (OROPS, static seat), 880 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted). |
| Bucket Pin Reach - Maximum Lift |
12.2 in |
| Rated Operating Capacity with Optional Counterweight |
2500.0 lb |
| Peak Torque - 1,500 rpm - SAE J1995 |
135.0 ft·lbf |
| Outside Cab*** |
103.0 dB(A) |
| Inside Cab** |
83.0 dB(A) |
| Note |
*Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, 1676 mm (66 in) dirt bucket, 320 mm (12.6 in) tracks, standard flow hydraulics, C0 cab (OROPS, static seat), 880 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted). |
| Ground Pressure - With 400 mm/15.7 in Track |
4.6 lb |
| Rated Operating Capacities - 50% Tipping Load |
2300.0 lb |
| Note (1) |
**The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. |
| Ground Contact Area - With 400 mm/15.7 in Track |
1716.0 in² |
| Note (2) |
***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. |