HOLT CAT Rentals

24/7 Rental Hotline: 800 RENT CAT (800 736 8228)
< Back<< Back To Main
Caterpillar - 730C Articulated Truck

True “on-the-go” Automatic Traction Control (ATC). Strong, durable Cat C13 ACERT engine platform with U.S. EPA Tier 4 Final/EU Stage IV engine emission solution. Advanced Productivity Electronics Control Strategy (APECS) delivers a smooth shifting transmission, improving acceleration with higher productivity.

Rent this Equipment
Brochure / Documentation - C10006293
Engine Model Cat C13
Gross Power - SAE J1995 375.0 hp
Net Power - SAE J1349 367.0 hp
Bore 5.12 in
Stroke 6.18 in
Displacement 763.0 in3
Engine Model - U.S. EPA Tier 4 Final/EU Stage IV Cat® C13 ACERT™
Net Power - ISO 14396 370.0 hp
No Engine De-rating Required Below 12500.0 ft
Peak Engine Torque Gross (SAE J1995) 1579.0 lb ft
Peak Engine Torque Net (ISO 14396) 1564.0 lb ft
Peak Engine Torque Speed 1200.0 RPM
Rated Payload 31.0 tons
Heaped SAE 2:1 23.0 yd3
Struck 17.4 yd3
Tailgate Heaped SAE 2:1 24.6 yd3
Tailgate Struck 18.2 yd3
Forward 1 5.0 mph
Forward 2 9.0 mph
Forward 3 14.0 mph
Forward 4 21.0 mph
Forward 5 29.0 mph
Forward 6 34.0 mph
Reverse 1 6.0 mph
Front Axle - Empty 33091.0 lb
Center Axle - Empty 10384.0 lb
Rear Axle - Empty 9656.0 lb
Total - Empty 53131.0 lb
Front Axle - Rated Load 7231.0 lb
Center Axle - Rated Load 27249.0 lb
Rear Axle - Rated Load 27249.0 lb
Total - Rated Load 61729.0 lb
Front Axle - Loaded 40322.0 lb
Center Axle - Loaded 37633.0 lb
Rear Axle - Loaded 36905.0 lb
Total - Loaded 114860.0 lb
Fuel Tank 108.8 gal
Cooling System 21.9 gal
Hydraulic System 29.1 gal
Engine Crankcase 10.5 gal
Transmission 9.2 gal
Final Drives/Differential 35.7 gal
Output Transfer Gear Box 6.3 gal
DEF Tank ISO 22241-1 5.3 gal
Interior Cab 76.0 dB(A)
Raise Time 12.0 Seconds
Lower Time 8.0 Seconds
Brakes ISO 3450 - 2011
Cab/FOPS ISO 3449 Level II - 2005
Cab/ROPS ISO 3471 - 2008
Steering ISO 5010 - 2007
Lock to Lock 4.75 seconds @ 60 rpm
Type High Strength Brinell HB450 Wear Resistant Steel
Note Dimensions are for machines equipped with 23.5R25 tires.
Turning Dimensions - Aisle width 210.0 in
Turning Dimensions - Clearance radius 318.0 in
Turning Dimensions - Inside radius 153.0 in
Turning Dimensions - SAE turning radius 294.0 in
Turning Dimensions - Steer angle - left/right 45.0 Degrees