| Engine Model |
Cat® C7.1: configured for two emissions options |
| Net Power |
248.0 hp |
| Bore |
4.1 in |
| Stroke |
5.3 in |
| Displacement |
427.8 in3 |
| Drum Width |
3.25 ft |
| Drum Diameter |
3.38 ft |
| Outside Diameter |
4.63 ft |
| Tips per Wheel |
60 |
| Front |
Planetary – Fixed |
| Rear |
Planetary – Oscillating |
| Maximum Depth of Cut |
0.73 ft |
| Maximum Lift Above Ground |
2.63 ft |
| Total Tilt Adjustment |
2.14 ft |
| Width - Over End Bits |
12.34 ft |
| Differential - Final Drives - Front |
17.2 gal (US) |
| Ground Clearance - Bumper |
2.18 ft |
| Hydraulic Tank Only |
19.8 gal (US) |
| チルトシリンダ（複動型） - ボア、ストローク |
101.6 mm × 167 mm (4 in × 6.6 in) |
| Vehicle Articulation Angle |
84 degrees |
| Rated Power (SAE J1349) - Tier 3/Stage IIIA Equivalent |
249.0 HP |
| Maximum Net Torque - 1,400 rpm - Tier 3/Stage IIIA Equivalent |
749.0 lb/ft |
| Ground Clearance |
1.23 ft |
| ブレードチルト調整 - 左 |
1.14 ft |
| Operating Weight |
49353.0 lb |
| Travel Speeds - Forward - Third |
13.2 mile/h |
| 最大流量 |
147 L/min @ 2,111 rpm (38.8 gal/min @ 2,111 rpm) |
| ステアリング圧力（制限付き） |
4003.0 psi |
| Turning Radius - Inside of Push Arms |
8.27 ft |
| 高さ - 回転灯最上部まで |
12.95 ft |
| Height – Top of Hood |
8.42 in |
| ポンプ流量（2,111 rpm時） |
23.5 gal/min |
| メインリリーフ圧力 |
3190.0 psi |
| 高さ - キャブルーフの上部まで |
11.98 ft |
| Gross Power - ISO 14396 - Tier 4 Final/Stage IV |
274.0 HP |
| Cooling System - Tier 4 Final/Stage IV |
21.4 gal (US) |
| Height - Top of Exhaust Pipe |
10.97 ft |
| Wheel Base |
10.99 ft |
| Rated Power (SAE J1349) - Tier 4 Final/Stage IV |
248.0 HP |
| Fuel Tank |
132.1 gal |
| Lubang |
4.0 in |
| Emissions |
Meets U.S. EPA Tier 4 Final/EU Stage IV emission standards or meets U.S. EPA Tier 3/EU Stage IIIA equivalent emission standards |
| Tingkat Suara Alat Berat (ISO 6395) Setara Tier 3/Stage IIIA |
110.0 dB(A) |
| Width - Over Drums |
10.64 ft |
| Diesel Exhaust Fluid Tank (Tier 4 Final/Stage IV Only) |
4.2 gal (US) |
| 走行速度 - 後進 - 2速 |
8.5 mile/h |
| Cooling System - Tier 3/Stage IIIA Equivalent |
19.3 gal (US) |
| Width – Over Wheels |
10.64 in |
| Transmission |
14.8 gal |
| Weight |
9720.0 lb |
| Rated Power (Net ISO 9249) - Tier 3/Stage IIIA equivalent |
249.0 HP |
| リアアクスルの中心線からバンパまで |
6.53 ft |
| High Idle Speed |
2270.0 r/min |
| Oscillation Angle |
±10 درجة |
| Maximum Operating Weight (Tier 3/Stage IIIA equivalent) |
48740.0 lb |
| 幅 - モールドボード長 |
11.98 ft |
| Langkah |
23.5 in |
| Gross Power - SAE J1995 - Tier 4 Final/Stage IV |
284.0 HP |
| Gross Power - ISO 14396 - Tier 3/Stage IIIA Equivalent |
275.0 HP |
| Machine Sound Level (ISO 6395) Tier 4/Stage IV |
109.0 dB(A) |
| Low Idle Speed |
800.0 r/min |
| Gross Power - SAE J1995 - Tier 3/Stage IIIA Equivalent |
286.0 HP |
| Torque Rise - Tier 4 Final/Stage IV |
52% |
| Length - With Blade on Ground |
23.48 ft |
| Maximum Operating Weight (Tier 4 Final/Stage IV) |
49353.0 lb |
| オペレータ騒音レベル - ISO 6396 |
70.0 dB(A) |
| Blade Tilt Angle - Right - Hydraulic |
4,8° |
| オペレータ騒音レベル - ISO 6396 |
71.0 dB(A) |
| 走行速度 - 前進 - 2速 |
7.5 mile/h |
| Differential - Final Drives - Rear |
17.2 gal (US) |
| 最大供給圧力 |
2930.0 psi |
| Maximum Net Torque - 1,400 rpm - Tier 4 Final/Stage IV |
899.0 lb/ft |
| Blade Tilt Angle - Left - Hydraulic |
5,5° |
| Height - Including Cutting Edge |
2.82 ft |
| 走行速度 - 後進 - 1速 |
4.8 mile/h |
| Features |
Drum and Shoe, Spring Applied, Hydraulic Released |
| ブレードチルト調整 - 右 |
1.0 ft |
| リフトシリンダ（複動型） - ボア、ストローク |
101.6 mm × 627 mm (4 in × 24.7 in) |
| Machine Sound Level (ISO 6395) Tier 3/Stage IIIA Equivalent |
112.0 dB(A) |
| Steering System - Circuit |
Closed Center Load Sensing |
| Rated Power (Net ISO 9249) - Tier 4 Final/Stage IV |
248.0 HP |
| Steering System - Pump |
Piston – Variable Displacement |
| 最大高度 - 出力低下なし |
9842.52 ft |
| 走行速度 - 前進 - 1速 |
4.2 mile/h |
| Torque Rise - Tier 3/Stage IIIA Equivalent |
26% |
| Travel Speeds - Reverse - Third |
15.0 mile/h |
| フロントアクスルの中心線からヒッチまで |
5.5 ft |
| Machine Sound Level (ISO 6395) Tier 4/Stage IV |
111.0 dB(A) |
| Engine Crankcase |
5.3 gal |
| Transmission - type |
Planetengetriebe – Lastschaltgetriebe – ECPC (Electronic Clutch Pressure Control, Elektronische Kupplungsdrucksteuerung) |
| Note |
All non-road Tier 4 Final and Stage IV diesel engines are required to use: – Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm for EPA and 10 ppm for EU (mg/kg) sulfur or less. Biodiesel blends up to B20 are acceptable when blended with 15 ppm for EPA and 10 ppm for EU (mg/kg) sulfur or less ULSD and when the biodiesel feedstock meets ASTM D7467 specifications. – Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specifications are required. – Diesel Exhaust Fluid (DEF) that meets all requirements defined in ISO 22241-1. |