| Net Power |
74.0 hp |
| Rated Net Power - 2,400 rpm - SAE J1349 |
73.0 HP |
| Emissions |
*The Cat C3.3B DIT engine meets U.S. EPA Tier 4 Final/EU Stage V (Europe only) or U.S. EPA Tier 4 Final (North America only) emission standards. |
| Description |
|
| Engine Model |
Cat® C3.3B DIT* |
| Bore |
73.0 in |
| Rated Net Power - 2,400 rpm - ISO 9249 (1977)/EEC 80/1269 |
74.0 HP |
| Operating Weight |
12346.0 lb |
| Fuel Tank |
13.7 gal |
| Hydraulic Oil |
18.5 gal |
| Engine Crankcase |
3.0 gal |
| Cooling System |
4.4 gal |
| Relief Pressure - Tilt Cylinder Head |
4496.0 psi |
| Maximum Flow - Implement Pump - Auxiliary Function High Flow |
31.0 gal/min |
| 3rd Function Maximum Working Pressure |
3408.0 psi |
| Hydraulic Cycle Time - Dump |
|
| Maximum Flow - Implement Pump - Auxiliary Function Standard Flow |
19.0 gal/min |
| Maximum Flow - Implement Pump |
19.0 gal/min |
| Hydraulic Cycle Time - Rackback |
|
| Bucket Capacity |
1.2 yd3 |
| Tipping Load - Straight - ISO 14397-1 |
8666.0 lb |
| Steering Articulation Angle - Each Direction |
39° |
| Reach - Full Lift and 45° Dump |
2.34 ft |
| Clearance - Full Lift and 45° Dump |
8.24 ft |
| Tipping Load - Full Turn - ISO 14397-1 |
7061.0 lb |
| Full Turn Tipping Load |
7507.0 lb |
| Reach - Bucket at 45°* |
2.33 ft |
| Note (3) |
Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires. |
| Width - Tread Center |
4.58 ft |
| Machine Width |
6.0 ft |
| Dig Depth** |
3.7 in |
| Note (2) |
**Vary with tire. |
| Width - Bucket |
6.17 ft |
| Length - Overall* |
17.92 ft |
| Length - Wheel Base |
7.08 ft |
| Height - Bucket Pin** |
10.58 ft |
| Operating Weight |
12496.0 lb |
| Height - Ground Clearance** |
11.0 ft |
| Clearance - Bucket at 45° * |
8.08 ft |
| Height - Ground to Cab** |
8.08 ft |
| Turning Radius - Over Bucket |
14.5 ft |
| Departure Angle |
33° |
| Note (1) |
*Vary with bucket. |
| Turning Radius - Inside of Tires |
7.33 ft |
| Articulation Angle |
39° |
| Clearance - Level Bucket** |
9.92 ft |
| Dump Angle at Full Lift |
45° |
| Width - Bucket |
6.17 ft |
| Turning Radius - Inside of Tires |
7.33 ft |
| Machine Width |
6.0 ft |
| Turning Radius - Over Bucket |
14.58 ft |
| Clearance - Bucket at 45° * |
7.67 ft |
| Dump Angle at Full Lift |
45° |
| Length - Wheel Base |
7.08 ft |
| Operating Weight |
12481.0 lb |
| Length - Overall* |
18.42 ft |
| Height - Bucket Pin** |
10.58 ft |
| Note (1) |
*Vary with bucket. |
| Note (3) |
Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires. |
| Departure Angle |
33° |
| Articulation Angle |
39° |
| Clearance - Level Bucket** |
9.92 ft |
| Height - Ground Clearance** |
11.0 ft |
| Reach - Bucket at 45°* |
2.67 ft |
| Dig Depth** |
4.2 in |
| Width - Tread Center |
4.58 ft |
| Height - Ground to Cab** |
8.08 ft |
| Note (2) |
**Vary with tire. |
| Maximum Gross Power |
73.0 HP |
| Bucket Capacities |
0.75-1.5 m3 (1.0-2.0 yd3) |
| ROPS |
SAE J1040 MAY94, ISO 3471-1994. |
| FOPS |
SAE J/ISO 3449 APR98, Level II, ISO 3449 1992 Level II. |
| Boost Flow Maximum Pressure |
3191.0 psi |
| Reverse - High Range |
22.0 mile/h |
| Forward - Range 2 |
12.0 mile/h |
| Note (2) |
When properly installed and maintained, the cab offered by Caterpillar, when tested with doors, and windows closed as per work cycle procedures specified in ISO 6395 2008, results in operator sound exposure Leq (Equivalent sound pressure level) of 66 dB(A) typical. |
| Steering AC Cycle Times - Full Left to Full Right - 2,620 rpm |
3.0 s |
| Hydraulic Cycle Time - 1,000 rpm - Dump, at Maximum Lift Height |
3.0 s |
| Hydraulic Cycle Time - 1,000 rpm - Raise, Ground Level to Maximum Lift |
9.6 s |
| Maximum Steering Torque - 0° (Straight Machine) |
37155.0 ft·lbf |
| Stroke |
4.7 in |
| Maximum Steering Torque - 39° (Full Turn) |
27747.0 ft·lbf |
| Hydraulic Cycle Time - 1,800 rpm - Dump, at Maximum Lift Height |
1.5 s |
| Nominal Flow - Steering Pump |
12.0 gal/min |
| Tilt Cylinder, Double Acting - Bore Diameter |
3.5 in |
| Axles - Front |
N/A |
| Hydraulic Tank |
12.2 gal |
| Option (3) |
340/80 R18 XMCL Michelin |
| Forward - High Range |
22.0 mile/h |
| Maximum Gross Torque - ISO 14396 |
192.0 lb/ft |
| Note (1) |
*Standard tire. |
| Hydraulic Cycle Time - 1,800 rpm - Float Down, Maximum Lift to Ground Level |
2.6 s |
| Lift Cylinder, Double Acting - Bore Diameter |
3.0 in |
| Note |
Specifications shown are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, Dunlop 405/70 SPT9 tires, full fuel, comfort ROPS cab, standard flow hydraulics and skid-steer coupler. The 906M is configured with a 0.9 m³ (1.2 yd³) bucket with bolt-on cutting edge. |
| Hydraulic Cycle Time - 1,800 rpm - Total Cycle Time |
9.6 s |
| Tilt Cylinder, Double Acting - Stroke |
16.4 in |
| Maximum Gross Power - DIN ISO 14396 |
74.2 HP |
| Steering Cylinder, Double Acting - Bore Diameter |
3.1 in |
| Reverse - Range 2 |
12.0 mile/h |
| Option (5) |
340/80 R18 Bibload Michelin |
| Displacement |
201.0 in3 |
| Steering Cylinder, Double Acting - Stroke |
11.8 in |
| Note |
All capacities are applicable for each model. Bucket selection must be made with an understanding of the material density and application to ensure machine stability is maintained within the tipping loads stated per model and configuration. |
| Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 |
191.0 ft·lbf |
| Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left |
<6 turns |
| Maximum Net Torque - SAE J1349 |
189.0 lb/ft |
| Forward - Range 1 |
6.0 mile/h |
| Option (2) |
340/80 R18 AT-R Firestone |
| Note (3) |
No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems. |
| Steering Cylinder, Double Acting - Rod Diameter |
1.4 in |
| Transmission - Gear Box |
2.2 gal (US) |
| General Purpose |
0.8 m³ (1 yd³), 0.9 m³ (1.2 yd³), 1.0 m³ (1.3 yd³), 1.1 m³ (1.4 yd³), 1.3 m³ (1.7 yd³) |
| Hydraulic Cycle Time - 1,800 rpm - Raise, Ground Level to Maximum Lift |
5.5 s |
| Light Material |
1.2 m³ (1.6 yd³), 1.5 m³ (2.0 yd³) |
| Bore |
3.7 in |
| Hydraulic Cycle Time - 1,000 rpm - Float Down, Maximum Lift to Ground Level |
2.6 s |
| Reverse - Range 1 |
6.0 mile/h |
| Note (4) |
Flywheel per the SAE reference conditions with the fan at maximum speed. |
| Note (2) |
Other tire choices available, contact your Cat dealer for details. |
| Maximum Working Pressure - Steering Pump |
3191.0 psi |
| Note (2) |
Net power shown is the power available at the flywheel when the engine is equipped with alternator, air cleaner, diesel exhaust filter, and fan at minimum speed. |
| Option (6) |
405/70 R18 SPT9 Dunlop* |
| Option (1) |
335/80 R18 XZSL Michelin |
| Lift Cylinder, Double Acting - Rod Diameter |
2.0 in |
| Grapple |
0.9 m³ (1.2 yd³) heaped |
| Note (1) |
Cat cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
| Lift Cylinder, Double Acting - Stroke |
27.4 in |
| Note (3) |
In certain applications, the loader's productive capabilities may exceed the tires' tonnes-km/h (ton-mph) capabilities. |
| Axles - Rear |
N/A |
| Multi-Purpose |
0.75 m³ (1.0 yd³), 0.9 m³ (1.2 yd³), 1.05 m³ (1.37 yd³) |
| Tilt Cylinder, Double Acting - Rod Diameter |
2.2 in |
| Note (5) |
The Cat C3.3B DIT Tier 4 Final/Stage V uses an active regeneration system which requires no operator interaction under normal conditions. |
| Option (7) |
12.5/80 R18 Flexport™ |
| Note (4) |
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. |
| Steering Articulation Angle - Each Direction |
39° |
| Option (4) |
340/80 R18 TRI2 Nokian |
| Note (1) |
Net power ratings are tested at the reference conditions for the specified standard. |
| Note (6) |
Stage V engine available for Europe only. |