| Engine Model |
Cat? C13 ACERT? |
| Bore |
5.12 in |
| Stroke |
6.18 in |
| Displacement |
763.0 in3 |
| Peak Gross Torque - 1,200 rpm - SAE J1995 |
1627.0 ft-lb |
| Maximum Power (1,800 rpm) - ISO 14396 (metric) |
hp |
| Maximum Net Power (1,700 rpm) - ISO 9249 (metric) |
hp |
| Maximum Power - ISO 14396 (metric) |
hp |
| Net Power – ISO 9249 |
404.0 hp |
| Maximum Net Torque (1,000 rpm) - ISO 9249 |
1518.0 lb ft |
| Maximum Net Power - ISO 9249 (metric) |
hp |
| Peak Torque (1,200 rpm) - ISO 14396 |
1609.0 lb ft |
| Maximum Gross Power (1,800 rpm) - SAE J1995 (metric) |
hp |
| Operating Weight |
78382.0 lb |
| Bucket Capacities |
4.6-12.0 m? (6.0-15.75 yd3) |
| Breakout Force |
58531.0 lbf |
| Static Tipping Load - Full 37° Turn - No Tire Deflection |
49354.0 lb |
| Static Tipping Load - Full 37° Turn - With Tire Deflection |
46462.0 lb |
| Forward 1 |
3.9 mph |
| Forward 2 |
7.4 mph |
| Forward 3 |
13.1 mph |
| Forward 4 |
23.3 mph |
| Reverse 1 |
4.3 mph |
| Reverse 2 |
8.5 mph |
| Reverse 3 |
15.0 mph |
| Reverse 4 |
24.9 mph |
| Hydraulic Cycle Time with Rated Payload - Lower, Empty, Float Down |
3.1 Seconds |
| Implement System - Optional 3rd/4th Function Maximum Pressure |
3159.0 psi |
| Implement System - Maximum Operating Pressure |
4975.0 psi |
| Hydraulic Cycle Time with Rated Payload - Raise from Carry Position |
5.3 Seconds |
| Hydraulic Cycle Time with Rated Payload - Total |
10.1 Seconds |
| Hydraulic Cycle Time with Rated Payload - Dump, at Maximum Raise |
1.7 Seconds |
| Implement Pump Type |
Variable Displacement Piston |
| Implement System - Optional 3rd/4th Function Maximum Flow |
63.0 gal/min |
| Implement System - Maximum Pump Output at 2,250 rpm |
119.0 gal/min |
| Brakes |
Brakes meet ISO 3450:2011 standards |
| Front |
Fixed |
| Rear |
Oscillating ?13 degrees |
| Maximum Single-Wheel Rise and Fall |
1.8 in |
| ROPS/FOPS |
ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards |
| Cooling System |
14.0 gal |
| Crankcase |
9.8 gal |
| Transmission |
23.8 gal |
| Hydraulic Tank |
40.0 gal |
| Differential - Final Drives - Front |
22.2 gal (US) |
| Differential - Final Drives - Rear |
22.2 gal (US) |
| Fuel Tank |
116.5 gal |
| DEF Tanks |
5.5 gal |
| Operator Sound Pressure Level (ISO 6396:2008) |
72.0 dB(A) |
| Note |
|
| Note (2) |
*For a standard machine configuration, measured according to the procedures specified with the cooling fan speed set at 70% of maximum value. |
| Exterior Sound Power Level (ISO 6395:2008) |
|
| Note (1) |
The sound values indicated are for specific operating conditions only. Machine and operator sound levels will vary at different engine and/or cooling fan speeds. Hearing protection may be needed when the machine is operated with a cabin that is not properly maintained, or when the doors and/or windows are open for extended periods or in a noisy environment. |
| Note (3) |
**For a standard machine configuration, measured according to the procedures specified. The measurement was conducted under the following conditions: distance of 15 m (49.2 ft), moving forward in second gear ratio with the cooling fan speed set at maximum value. |
| Note |
Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 914 mm roll radius. |
| Emissions |
Cat engine with ACERT Technology ? meets Stage IV emission standards. |
| Note (2) |
Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
| Note |
Weight based on a machine configuration with Bridgestone 875/65R29 VLTS L4 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound suppression, and a 6.1 m3 general purpose bucket with BOCE. |
| Note (2) |
The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and aftertreatment. |
| Note (3) |
The gross power advertised is with the fan at maximum speed. |
| Note (1) |
For a machine configuration as defined under ?Weight.? |
| Air Conditioning |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes. |
| Note (1) |
The power ratings apply at the stated speed when tested under the reference conditions for the specified standards. |