| Engine Model |
Cat C4.4 |
| Power - Net |
104.0 hp |
| Displacement |
269.0 in3 |
| Bore |
4.13 in |
| Stroke |
5.0 in |
| ISO 9249 |
104.0 hp |
| Note |
Engine meets U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final) emission standards. |
| Rated Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 |
104.0 HP |
| Drive Pumps |
1 |
| Maximum travel speed - forward |
5.6 mph |
| Relief valve settings |
7033.0 psi |
| Maximum travel speed - reverse |
6.2 mph |
| Track motors |
2 |
| Operating Weight - XL |
20313.0 lb |
| Operating Weight - LGP |
20992.0 lb |
| Fuel Tank |
51.5 gal |
| Crankcase and filter |
2.91 gal |
| Final drives, XL (each side) |
2.6 gal |
| Cooling System |
5.92 gal |
| Final drives, LGP (each side) |
2.6 gal |
| Transmission/hydraulic tank |
15.7 gal |
| Pump Output |
17.7 gal/min |
| Relief valve setting |
2988.0 psi |
| Track gauge - LGP with 770 mm (30 in) shoes |
73.2 in |
| Length of track on ground - XL |
91.0 in |
| Length of track on ground - LGP |
91.0 in |
| Shoe width - LGP |
26.0 in |
| Ground pressure - XL |
5.6 psi |
| Shoe width - LGP Option 2 |
30.0 in |
| Ground contact area - LGP |
4726.0 in2 |
| Shoe width - XL |
20.0 in |
| Ground contact area - XL |
3652.0 in2 |
| Ground pressure - LGP |
4.5 psi |
| Track gauge - LGP |
69.0 in |
| Ground contact area - LGP with 770 mm (30 in) shoes |
5514.0 in2 |
| Ground pressure - LGP with 770 mm (30 in) shoes |
3.93 psi |
| Track gauge - XL |
63.0 in |
| Type |
Parallelogram |
| Number of Shanks |
3 |
| Height |
6.5 in |
| Weight |
1222.0 lb |
| Overall width |
67.3 in |
| Maximum reach at ground line |
21.9 in |
| Maximum digging depth |
13.3 in |
| Maximum ground clearance under tip |
17.6 in |
| Weight |
1345.0 lb |
| Winch Drive |
Hydrostatic |
| Control |
Hydraulic |
| Speed |
Variable |
| Drum capacity - optional cable |
256.0 ft |
| Winch length |
27.76 in |
| Maximum line pull - bare drum |
40000.0 lb |
| Throat clearance |
6.75 in |
| Maximum line speed - bare drum |
131.0 ft/min |
| Rope diameter - recommended |
0.63 in |
| Drum diameter |
10.0 in |
| Overall width |
29.2 in |
| Rope diameter - optional |
0.75 in |
| Maximum line speed - full drum |
207.0 ft/min |
| Maximum line pull - full drum |
25000.0 lb |
| Drum capacity - recommended cable |
371.0 ft |
| Drum width |
10.8 in |
| Note |
Specs are for machine equipped with dozer blade, canopy ROPS, back-up alarm, operator, coolant, lubricants and full fuel tank. |
| FOPS |
ISO 3449:2005 Level II |
| Ground Clearance - XL |
13.0 in |
| BLADE: Blade Width at Maximum Angle - Intermediate |
105.1 in |
| Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage |
40 |
| Width - Tractor - Standard Shoes - No Blade - LGP (770 mm/30 in) |
103.5 in |
| BLADE: Blade Capacity (SAE) - Intermediate |
2.73 yd³ |
| BLADE: Blade Width at Maximum Angle - LGP |
115.8 in |
| Width - Tractor - Standard Shoes - No Blade - XL |
83.1 in |
| BLADE: Blade Height - Intermediate |
39.8 in |
| Tractor Height - LGP |
109.0 in |
| Length - Track on Ground - LGP, 762 mm (30 in) |
91.0 in |
| Ground Clearance - LGP, 770 mm (30 in) Shoes |
13.0 in |
| BLADE: Blade Capacity (SAE) - LGP |
3.06 yd³ |
| BLADE: Blade Lift Height - XL |
30.2 in |
| Overall Length - With Blade - LGP |
169.1 in |
| Track Gauge - LGP |
68.9 in |
| BLADE: Blade Capacity (SAE) - XL |
2.86 yd³ |
| BLADE: Digging Depth - XL |
23.1 in |
| Track Gauge - LGP, 770 mm (30 in) |
73.2 in |
| Sound Levels - SAE J1166 FEB2008 |
79.0 dB(A) |
| Number of Shoes - Each Side - SystemOne Undercarriage |
36 |
| BLADE: Blade Width at Maximum Angle - XL |
103.8 in |
| BLADE: Digging Depth - Intermediate |
22.5 in |
| Width - Tractor - Standard Shoes - No Blade - LGP |
94.9 in |
| Diesel Exhaust Fluid (DEF) Tank |
4.9 gal (US) |
| BLADE: Blade Width - XL |
109.5 in |
| Overall Length - With Blade - LGP, 770 mm (30 in) Shoes |
169.1 in |
| BLADE: Blade Lift Height - Intermediate |
30.2 in |
| Sound Levels - ISO 6396:2008 |
79.0 dB(A) |
| Tractor Height - LGP, 770 mm (30 in) |
109.0 in |
| BLADE: Maximum Tilt - XL |
15.8 in |
| BLADE: Digging Depth - LGP |
22.5 in |
| Length - Basic Tractor - Without Blade - LGP |
128.5 in |
| ROPS |
ISO 6396:2008 |
| BLADE: Blade Height - LGP |
39.8 in |
| Tractor Height - XL |
109.0 in |
| BLADE: Maximum Tilt - LGP |
17.6 in |
| BLADE: Blade Cutting Edge Angle, Adjustable - XL |
52° to 58° |
| Track Gauge - XL |
63.0 in |
| Number of rollers on each side |
7 |
| Length - Basic Tractor - Without Blade - LGP, 770 mm (30 in) Shoes |
128.5 in |
| Ground Clearance - LGP |
13.0 in |
| BLADE: Blade Lift Height - LGP |
30.2 in |
| BLADE: Blade Width - Intermediate |
115.0 in |
| Length - Basic Tractor - Without Blade - XL |
128.5 in |
| BLADE: Blade Height - XL |
42.2 in |
| BLADE: Maximum Angle (either side) - LGP |
25° |
| Overall Length - With Blade - XL |
170.1 in |
| Operating Weight - LGP, 762 mm/30 in |
21442.0 lb |
| BLADE: Blade Cutting Edge Angle, Adjustable - LGP |
52° to 58° |
| BLADE: Maximum Tilt - Intermediate |
17.6 in |
| BLADE: Maximum Angle (either side) - Intermediate |
25° |
| BLADE: Maximum Angle (either side) - XL |
25° |
| BLADE: Blade Width - LGP |
126.7 in |
| BLADE: Blade Cutting Edge Angle, Adjustable - Intermediate |
52° to 58° |