| Engine Model |
Cat® C18 ACERT™ |
| Flywheel Power |
410.0 hp |
| Bore |
5.7 in |
| Stroke |
7.2 in |
| Displacement |
1106.0 in3 |
| Engine Power (ISO 14396) |
441.0 hp |
| Net Power - DIN 70020 |
|
| Net Power - ISO 9249 |
410.0 hp |
| Emissions |
U.S. EPA Tier 2/EU Stage II Equivalent and U.S. EPA Tier 3/EU Stage IIIA Equivalent |
| Net Power - SAE J1349 |
448.0 hp |
| Note (1) |
* Excludes all fan losses. |
| Operating Weight |
105539.0 lb |
| Shipping Weight |
78806.0 lb |
| 1 Forward |
2.4 mph |
| 2 Forward |
4.2 mph |
| 3 Forward |
7.3 mph |
| 1 Reverse |
2.9 mph |
| 2 Reverse |
5.2 mph |
| 3 Reverse |
8.9 mph |
| 1 Forward - Drawbar Pull |
161000.0 lb |
| 3 Forward - Drawbar Pull |
50000.0 lb |
| 2 Forward - Drawbar Pull |
90000.0 lb |
| Pump Type |
Piston-type pump geared from flywheel |
| Pump Output (Steering) |
102.0 gal/min |
| Pump Output (Implement) |
60.0 gal/min |
| Tilt Cylinder Rod End Flow |
37.0 gal/min |
| Tilt Cylinder Head End Flow |
50.0 gal/min |
| Bulldozer Relief Valve Setting |
3800.0 psi |
| Tilt Cylinder Relief Valve Setting |
2800.0 psi |
| Ripper (Lift) Relief Valve Setting |
3800.0 psi |
| Ripper (Pitch) Relief Valve Setting |
3800.0 psi |
| Steering |
5875.0 psi |
| Tank Capacity |
23.5 gal |
| Shoe Type |
Extreme Service |
| Width of Shoe |
24.0 in |
| Shoes/Side |
43 |
| Grouser Height |
3.3 in |
| Pitch |
9.44 in |
| Ground Clearance |
23.5 in |
| Track Gauge |
88.6 in |
| Length of Track on Ground |
136.6 ft |
| Ground Contact Area |
6569.0 in2 |
| Track Rollers/Side |
8 |
| Number of Carrier Rollers |
1 per side (optional) |
| Fuel Tank |
235.0 gal |
| Cooling System |
26.7 gal |
| Engine Crankcase* |
9.0 gal |
| Power Train |
43.3 gal |
| Final Drives (each) |
3.9 gal |
| Roller Frames (each) |
11.9 gal |
| Pivot Shaft Compartment |
7.9 gal |
| Hydraulic Tank Oil (only) |
23.5 gal |
| Maximum Tilt |
37.0 in |
| Total Operating Weight** - With Blade and Single-Shank Ripper |
105539.0 lb |
| Ground Clearance |
56.0 in |
| Digging Depth |
23.9 in |
| Width - Over End Bits |
15.25 ft |
| Height |
6.35 ft |
| Capacity - SAE J1265 |
17.7 yd³ |
| Weight* - Without Hydraulic Controls |
15130.0 lb |
| Maximum Tilt |
39.9 in |
| Digging Depth |
23.9 in |
| Capacity - SAE J1265 |
21.4 yd³ |
| Total Operating Weight** - With Blade and Single-Shank Ripper |
106836.0 lb |
| Width - Over End Bits |
14.14 ft |
| Weight* - Without Hydraulic Controls |
16288.0 lb |
| Height |
6.35 ft |
| Ground Clearance |
56.0 in |
| Note (1) |
* Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU-Blade, Ripper, 610 mm (24 in) ES shoes, and operator. |
| Total Operating Weight* - With SU-Blade and Ripper |
105539.0 lb |
| Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole |
882 mm/817 mm (34.7 in/32.2 in) |
| Note (1) |
* Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU-Blade, Ripper, 610 mm (24 in) ES shoes, and operator. |
| Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole |
34.6 in |
| Total Operating Weight* - With SU-Blade and Ripper |
106309.0 lb |
| Overall Beam Width |
NA |
| Note (2) |
+ Includes (1) shank, add 347 kg for each additional shank. |
| Pry-Out Force |
332 kN/331 kN (74,637 lbf/74,412 lbf) |
| Maximum Penetration - Standard Tip |
31.4 in |
| Maximum Penetration Force - Shank Vertical |
34621.0 lb |
| Note (2) |
Single-shank ripping arrangement weight includes pin puller. |
| Number of Shank Holes |
2 |
| Number of Shank Holes |
3 |
| Weight - With One Shank |
9156.0 lb |
| Weight - With One Shank |
4293 kg/4420 kg (9,464 lb/9,744 lb) |
| Overall Beam Width |
4.36 ft |
| Pry-Out Force - Multi-Shank Ripper with One Tooth |
81156.0 lb |
| Maximum Penetration - Standard Tip |
1231 mm/1727 mm (48.5 in/68 in) |
| Maximum Penetration Force - Shank Vertical |
158 kN/172 kN (35,520 lbf/38,667 lbf) |
| Winch Model |
PA140VS |
| Weight* |
3950.0 lb |
| Oil Capacity |
4.0 gal |
| Increased Tractor Length |
21.9 in |
| Drum Width |
12.6 in |
| Wire Cable Diameter - Recommended |
1.13 in |
| Wire Cable Diameter - Optional |
1.25 in |
| ROPS |
ROPS (Rollover Protective Structure) offered by Caterpillar for the machine meets ROPS criteria SAE J1040 MAY94, ISO 3471:1994. |
| FOPS |
FOPS (Falling Object Protective Structure) meets ISO 3449:2005 Level II. |
| Length - Basic Tractor - With Winch |
218.3 in |
| Overall Length - Basic Tractor |
193.3 in |
| Note |
* With oil filters. |
| Maximum Drum Capacity - Optional Cable Length |
204.0 ft |
| Width - Over Trunnions |
129.9 in |
| Note (2) |
** Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes, and operator. |
| Track Gauge |
88.6 in |
| Wire Cable Ferrule Size - Length |
2.8 in |
| Length - With SU-Blade** |
270.9 in |
| Wire Cable Ferrule Size - Outside Diameter |
2.4 in |
| Note (3) |
Net power advertised is the power available at the flywheel when the engine is equipped with fan at max speed, air cleaner, muffler and alternator. |
| Note (2) |
Implement Pump output measured at 1,800 rpm and 20 000 kPa (2,900 psi). |
| Note (2) |
**Includes drawbar. |
| Sound (2) |
The exterior sound pressure level for the standard machine measured at a distance of 15 m (49 ft) according to the test procedures specified in SAE J88 APR95, mid-gear-moving operation, is 87 dB(A). |
| Length - With U-Blade |
274.3 in |
| Note (2) |
* Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb). |
| Height - FOPS Cab* |
150.4 in |
| Length - Track on Ground |
136.6 in |
| Maximum Drum Capacity - Recommended Cable Length |
257.0 ft |
| Height - Top of Stack* |
154.3 in |
| Height - ROPS/Canopy* |
157.5 in |
| Ground Clearance* |
23.4 in |
| Drawbar Height (Center of Clevis)* |
30.0 in |
| Note (1) |
Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU-Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes, and operator. |
| Note (2) |
** Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes, and operator. |
| Overall Length - SU-Blade/SS Ripper |
324.0 in |
| Note (1) |
Variable speed, hydraulically driven, dual braking system, three-roller fairlead. |
| Note (3) |
Electro-hydraulic pilot valve assists operations of ripper and dozer controls. Standard hydraulic systems includes four valves. |
| Length - With Multi-Shank Ripper |
257.4 in |
| Note (1) |
*Includes grouser height for total dimensions on hard surfaces. |
| Length - Basic Tractor - With Drawbar |
204.0 in |
| Note (1) |
Steering Pump output measured at 1,800 rpm and 30 000 kPa (4,351 psi). |
| Note (2) |
Shipping Weight: Base machine chassis with cab, pivot shaft, roller frames, track and ROPS. |
| Note |
Positive Pin Retention Track. |
| Width - Without Trunnions - Standard Shoe |
113.4 in |
| Note (2) |
Engine ratings apply at 1,833 rpm. |
| Note (1) |
* Includes blade installation arrangement, blade tilt cylinder, and blade lift cylinders. |
| Note (4) |
No derating required up to 2286 m (7,500 ft) altitude. High altitude attachment available for greater than 2286 m (7,500 ft). |
| Note (4) |
Complete system consists of pump, tank with filter, oil cooler, valves, lines, linkage and control levers. |
| Length - With Single-Shank Ripper |
257.0 in |
| Note (1) |
* Includes blade installation arrangement, blade tilt cylinder, and blade lift cylinders. |
| Sound (1) |
Operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 77 dB(A), for cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed. |